Adjusting the lens
Focus
Press the Lens button on the remote control. The first press selects focus. Agrid
pattern will appear on the sceen and a legend indicating focus is selected. Use
the up and down arrow keys until the picture is sharp.
Zoom
Press the Lens button on the remote control. The second press selects zoom.
Agrid pattern will appear on the sceen and a legend indicating zoom is selected.
Use the up and down arrow keys until the picture is the required size.
Shift
Press the Lens button on the remote control. The third press selects shift.
Agrid pattern will appear on the sceen and a legend indicating shift is selected.
Use the up, down, left and right arrow keys until the picture is in the required
position.
Rev A October 2010
Page 3.3
Digital Projection
HIGHlite 6000
User Manual
3. Getting Started
Selecting an input signal or test pattern
Input
Connect an HDMI video source to the projector. The signal should be
automatically detected by the projector, and should be displayed within a two or
three seconds.
Test pattern
If you have no video source connected to the projector, then you can display a test
pattern as follows:
Press
At the end of the test pattern sequence you will be returned to the source image.
on the remote control, until the desired test pattern is displayed.
·
·
Notes
For more information about
connecting input signals, see
Signal Inputs
, in
section 2. of
the User Manual: Installation
.
For more detailed information
about input connections, see
Input signals
in
section 6.
For more information about lens
shift, see
Shifting the image
in
section 2. of the User Manual:
Installation
.
·
·
·
