Installation Precautions
Digital Projection E-Vision Laser 5100 Series
Before installation, make sure that the surface, ceiling or rigging that is to support
the projector is capable of supporting the combined weight of the projector and lens.
Backup safety chains or wires should always be used with ceiling mount
installations.
When installing a ceiling mount, make sure the weight limit is not exceeded and the
projector is firmly secured.
The projector can be operated any position, as shown in the diagram:
360
˚
360
˚
Tilt (Left) and Roll (Right)
Allow at least 50cm (19.7in) of space between the ventilation outlets and any wall,
and 30cm (11.8in) on all other sides.
Important Information
Rev B September 2020
page 13
