General Precautions
Digital Projection E-Vision Laser 5100 Series
General Precautions
The unit is never to be operated if the unit is defective or the cover or seal is
damaged.
No maintenance allowed by end user.
Do not open the cabinet. There are no user serviceable parts inside.
No service is allowed except by authorized personnel.
Use only the power cable provided.
Ensure that the power outlet includes a Ground connection, as this equipment MUST
be earthed.
Take care to prevent small objects such as paper or wire from falling into the
projector. If this does happen, switch off immediately, and have the objects
removed by authorised service personnel.
Do not expose the projector to rain or moisture, and do not place any liquids on top
of the projector.
Unplug before cleaning, and use a damp, not wet, cloth.
Do not touch the power plug with wet hands.
Do not touch the power plug during a thunder storm.
Handle the power cable carefully and avoid sharp bends. Do not use a damaged
power cable.
Do not touch the ventilation outlets, as they will become hot in use.
Do not cover or obstruct the ventilation outlets or inlets.
Do not cover the lens whilst the projector is switched on. This could cause a fire.
Always allow the projector to cool for 5 minutes before disconnecting the power or
moving the projector.
Never use strong detergents or solvents such as alcohol or thinners to clean the
projector and lens.
Important Information
Rev B September 2020
page 11
