Basic Operating Instructions
Digital Projection E-Vision Laser 5100 Series
Selecting a test pattern
The following test patterns are available: RGB Ramps
,
Color Bars
,
Step Bars
,
Check Board
,
Grid
,
Horizontal Lines
,
Vertical Lines
,
Diagonal Lines
,
Horizontal Ramp
,
Vertical Ramp
,
White
,
Red
,
Green
,
Blue
,
Black
, None.
To display a test pattern:
1. Press
MENU
on the remote or control panel to open the OSD.
2. Use the
LEFT
and
RIGHT
arrow buttons to access the
Settings 1
menu.
3. Use the
UP
,
DOWN
and
RETURN
buttons to access the
Advanced 2
sub menu.
4. Highlight
Test Pattern
and select a test pattern using the
LEFT
and
RIGHT
arrow
buttons.
To return to the main image, set the test pattern to none and exit the OSD by pressing
EXIT
.
Adjusting the image
Orientation
This can be set from the
Settings 1
menu.
Highlight
Projection
and choose from
Desktop Front
,
Desktop Rear
,
Ceiling Front
and
Ceiling Rear
.
Geometry
Settings such as
Keystone
and
4 Corners
can be set from the
Settings 1
menu.
Keystone requires an external signal input to enable it to be set.
Picture
Settings such as
Display Modes
,
Brightness
,
Contrast
,
Color Manager
(
Hue
,
Saturation
and
Gain
), and
Advanced
(
Sharpness
and
Gamma
) can be set from the
Image
menu.
This product includes a DICOM simulation feature intended for training and other non-
medical diagnosis purposes.
Important Information
Rev B September 2020
page 25
