Digital Monitoring Products SecureCom Smart Z-5010T, Installation And Programming Manual

Page: 8 / 40

4 Z-5010T Installation and Programming Guide | Digital Monitoring Products, Inc.
INSTALL THE THERMOSTAT
Uninstall the Existing Thermostat
1. Turn off any breakers and switches that are connected to the existing
thermostat. Turn on the system and wait five minutes to make sure it doesn’t
start.
2. Remove the existing thermostat
cover. Take a photo of the
connections.
3. Label the wires according to
their terminal markings as
shown in Figure 2. Connections
may differ from the example
shown. Keep in mind that color
alone is not a reliable indicator
of wire purpose.
4. Disconnect all wiring from the existing thermostat, then remove the its base
from the wall. If the thermostat contains mercury, dispose of it according to
U.S. Environmental Protection Agency or Environment Canada guidelines.
1
R
G
W
Y
C R G W Y
C
Figure 2: Labeling Existing Wires