Digital Monitoring Products SecureCom Smart Z-5010T, Installation And Programming Manual

Page: 30 / 40

26 Z-5010T Installation and Programming Guide | Digital Monitoring Products, Inc.
Change the Setpoint
To change the setpoint, press the

buttons. The screen will switch to the setpoint
change screen and show the current setpoint of the current heating or cooling mode.
Adjust the setpoint temperature up or down with the  buttons.
Note:
When in Change Setpoint mode, pressing the MODE button will switch between
the Heat and Cool setpoints.
Automatic Setpoint Push
The thermostat automatically adjusts the setpoints to maintain a 3 ° separation between
heating and cooling.
Set Fan Mode
Press the FAN button and use the

buttons to select the system fan mode.
• Auto: Fan automatically operated by the HVAC system (normal setting).
• On: Manual Fan mode. The fan remains on independent of the heating or cooling
system operation until the mode is changed back to Auto.