Digital Monitoring Products SecureCom Smart Z-5010T, Installation And Programming Manual

Page: 9 / 40

Digital Monitoring Products, Inc. | Z-5010T Installation and Programming Guide 5
Mount and Connect the Thermostat
1. Remove the cover and body from the thermostat base as shown in Figure 3.
2. Mount the base to the wall with the included wall anchors and screws. Refer
to Figure 4.
3. Wire the thermostat according to the wire labels. The thermostat terminals
have two sets of labels: Top labels apply to standard connections and lower
labels apply to heat pump connections. For more information, refer to
Table 1 and the following sections.
2
Figure 3: Removing the Base Figure 4: Mounting the Base
Base
Cover
Body
Thermostat
Bottom
Push tab to
release base