Digital Monitoring Products 7800 series, User Manual

Page: 18 / 28

14 Graphic Touchscreen Keypad User Guide Arming and Disarming
Disarming During an Alarm
Home/Sleep/Away, Home/Away, and All/Perimeter
1. While the alarm bell or siren
sounds, you may choose to
enter your user code or present
credential to silence the alarm
sounder.
For a burglary alarm, the screen
displays
IS THIS A FALSE ALARM?
or
CANCEL VERIFY.
This display remains on the screen until a selection is made or
the internal system bell cutoff timer expires.
After the pre-programmed alarm communication delay, the
alarm is sent to the Central Station. This allows you to investigate
the alarm prior to disarming the system.
Note: The alarm sounder will silence at the first key pressed but
this does not cancel the alarm.
2. If a valid alarm has not occurred,
press
YES
or
CANCEL
to disarm
the system and cancel the alarm.
The screen displays
ALARM
CANCELLED
then
ALL SYSTEM OFF
is displayed in the System Status
area on the Main Screen to confirm
the system is disarmed.
OR
If the alarm is valid, press
NO
or
VERIFY
to send an alarm verify
message to the Central Station. The system will remain armed.
System Arming
Area Systems
Your security system is programmed into separate areas.
You may arm and disarm all areas at one time or each area individually.
You may only arm or disarm areas authorized for your user code.
After entering your user code, the system allows you to arm either
all of the areas to which you have access or one or more selected
areas. If you choose to arm all areas, the system begins verifying
that all zones in those areas are in a good condition. If you choose
to arm selected areas, the system prompts you to choose the areas
you want to arm.
Arming the System
1. On the Main Screen, press the Shield
to display Keypad.
2. Press CMD until ARM DISARM
displays on the screen.
ALARM CANCELLED
Keypad Display
ALARM CANCELLED
RESET
1
ABC
5
MNO
9
YZ
2
DEF
6
PQR
0
3
GHI
7
STU
4
JKL
8
VWX
CMD
ALL
CHIME PERIM
HOME
SLEEP
ALARM? NO YES
RESET
1
ABC
5
MNO
9
YZ
2
DEF
6
PQR
0
3
GHI
7
STU
4
JKL
8
VWX
CMD
ALL
CHIME PERIM
HOME
SLEEP
USER MENU
IS THIS A FALSE
IS THIS A FALSE ALARM?
Keypad Display
ARM DISARM
RESET
1
ABC
5
MNO
9
YZ
2
DEF
6
PQR
0
3
GHI
7
STU
4
JKL
8
VWX
CMD
ALL
CHIME PERIM
HOME
SLEEP
USER MENU
ARM/DISARM Keypad Display
Main Screen Interactive Shield