Picture Porter Elite
User’s Guide
Page 8
Revision 1.2.8-1
2.3.
Power Management
2.3.1.
Installing the battery
1.
Locate the battery door at the bottom of Picture Porter Elite. Slide the battery
door out to open it.
2.
Insert the included Lithium-Ion battery into the battery compartment. Make
sure the gold contacts are inserted headfirst.
WARNING
: Inserting the battery incorrectly will damage the battery
connector.
3.
Do not remove the yellow pull-tab from the battery. The yellow pull-tab helps
you pull out the battery easily.
4.
Close the battery door and slide it back until you feel a click.
2.3.2.
Charging the battery via AC power adapter
For best battery performance, charge the new battery for a full 6 hours.
Connect Picture Porter Elite to the AC power adapter to charge the battery.
Note
: It is recommended that you use the AC power adapter when connecting Picture Porter
Elite to a computer or printer to ensure an uninterrupted power supply.
2.3.3.
Power indicator LED
The power indicator LED on Picture Porter Elite indicates its power status.
Green
: Picture Porter Elite is powered on and running on battery power.
Red
: Picture Porter Elite is off and the battery is charging. When the battery is
fully charged, the LED will turn off.
Green & Red
: Picture Porter Elite is powered on
and
charging. The on-screen
battery indicator will flash to show that it is charging.
