Digital Equipment VAXstation 3100 Series, Upgrade Manual, Page: 5 / 66

Index
Figures
1–1
Typical Screen Display of a SHOW DEVICE Command . . . . .
1–5
1–2
Disconnecting the System Unit and Monitor Cables . . . . . . .
1–6
1–3
Removing the VAXstation 3100 System Unit Cover . . . . . . . .
1–7
1–4
Attaching the Antistatic Wrist Strap to the System Unit . . . .
1–8
2–1
Common Configuration for a Model 30 and 38 Drive
Plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2–2
2–2
Removing RZ2 x Fixed Disk Drives from the Drive Plate . . . .
2–4
2–3
SCSI Mass Storage Controller Module Cables . . . . . . . . . . . .
2–5
2–4
Removing the SCSI Mass Storage Controller Module . . . . . .
2–6
2–5
Removing the Drive Plate from a Model 30 or 38 System . . .
2–8
2–6
Scanline Coprocessor Mounting Brackets . . . . . . . . . . . . . . . .
2–10
2–7
Removing the Scanline Coprocessor from the Model 30 and
38 System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2–11
2–8
Removing the Ethernet ROM from the Model 30 and 38
System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2–12
3–1
Common Configuration for a Model 40 and 48 Drive
Plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3–3
3–2
Disconnecting the SCSI and Power Cables . . . . . . . . . . . . . .
3–5
3–3
Removing the Upper Drive Plate from the Model 40 and 48
System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3–6
3–4
Removing RZ2 x Fixed Disks from the Drive Plate . . . . . . . . .
3–7
3–5
Lower Drive Plate Configuration . . . . . . . . . . . . . . . . . . . . . .
3–9
3–6
Removing the Lower Drive Plate . . . . . . . . . . . . . . . . . . . . . .
3–10
3–7
Scanline Coprocessor Mounting Brackets . . . . . . . . . . . . . . . .
3–12
3–8
Removing the Scanline Coprocessor from the Model 40 and
48 System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3–13
3–9
Removing the Ethernet ROM from the Model 40 and 48
System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3–14
4–1
Common Configuration of the Model 76 Drive Plate . . . . . . .
4–2
4–2
Disconnecting the SCSI Signal and Power Cables . . . . . . . . .
4–4
4–3
Removing RZ2 x Fixed Disks from the Drive Plate . . . . . . . . .
4–6
4–4
Removing Memory Boards from the Model 76 System . . . . . .
4–8
4–5
Scanline Coprocessor Mounting Brackets . . . . . . . . . . . . . . . .
4–10
v