Removing Fixed Disk Drives
Remove the
Drive Plate
To remove the drive plate, do the following and refer to
Figure 2–5:
1. Disconnect the internal power cable from the internal power
supply.
2. Disconnect the SCSI system cable from the SCSI system port
(if it has not already been done).
3. Loosen the five captive screws.
4. Loosen the three Phillips-head slide mount screws on the
side of the drive plate.
5. Slide the drive plate towards the front of the system unit and
lift it up and out.
Removing Options from a Model 30 and 38 Workstation 2–7