Recording VAXstation 3100 System Information
Recording VAXstation 3100 System Information
Shut Down the
Software
Refer to the
VMS Installation and Operations Manual
for the
proper operating system shutdown procedure.
Enter the
SHOW DEVICE
Command
Before you begin the upgrade you need to record the system
Ethernet address (
only if you are moving the Ethernet ROM to
the new system
) and the SCSI ID settings on your disk drives.
Follow these steps and refer to Figure 1–1:
1. Press the Halt button on the rear of the system unit.
Result: The system displays the console prompt (>>>) on the
screen.
2. Enter the SHOW DEVICE command at the console prompt
and press
Return
.
3. Record the system Ethernet address (if applicable).
4. Record the SCSI ID number for each drive.
1–4 Preparing for the System Upgrade