manualshive.com logo in svg

Digital Equipment Pro-face PS-3450A Series, Reference Manual, Page: 12 / 103

Share
Download
Digital Equipment Pro-face PS-3450A Series Reference Manual Download Page 12

Chapter 1 Setting Up Software

1-5

1.3

Setting Up an HDD with Pre-installed OS

In the PS-A with pre-installed OS, the following software has been installed in advance.

„

PS-A with Windows

®

 2000 Pre-installed

•

Windows

®

 2000 Professional operating system manufactured by Microsoft Corporation

•

Mouse Emulation Software manufactured by DMC Co., Ltd. (TSC-1310D/DD)

•

Keyclick32 keyboard emulator manufactured by IN-fINITY soft

•

PS-A dedicated utility software and drivers manufactured by Pro-face

„

PS-A with Windows

®

 XP Pre-installed

•

Windows

®

 XP Professional operating system manufactured by Microsoft Corporation

•

Mouse Emulation Software manufactured by DMC Co., Ltd. (TSC-1310D/DD)

•

Keyclick32 keyboard emulator manufactured by IN-fINITY soft

•

PS-A dedicated utility software and drivers manufactured by Pro-face

•

Each pre-installed operating system on the hard disk in the PS-A unit is designed specially for 

PS-3450A/PS-3451A.

•

For details about the drivers and utility software, refer to the following section.

SEE

1.4 PS-A Dedicated Software (page1-12)

Summary of Contents for Pro-face PS-3450A Series








































































































Reviews:

No comments