Troubleshooting
2-8
Problem
Possible Cause
Action
Server does not
boot from a target
diskette drive.
Drive ID incorrectly set.
Diskette drive not
enabled.
Diskette boot option
disabled.
Diskette does not contain
start-up files.
Diskette drive is empty.
Diskette is worn or
damaged.
Loose cables.
Make sure the drive ID is
correctly set. Refer to the
documentation that was
supplied with the diskette drive.
Run the BIOS Setup utility to
enable the diskette drive.
Run the SCU and set boot
option A then C.
Insert a diskette with the correct
start-up files.
Insert a diskette that contains
an operating system.
Try another diskette.
Secure all cable connections.
continued
