Digital Equipment FR-902AA-A3, Service Maintenance Manual

Page: 24 / 86

Utilities & Configuration Digital STARION 400i - 900i PC
24 MCS Logistics Engineering - Nijmegen
Boot Options
Menu Fields Settings Comments
Boot sequence A: only
A: then C:
C: then A:
C: only Each time the computer boots, it will load the operating system from
the sequence selected.
SETUP
prompt Enabled
Disabled
Enables or disables the <F2> Setup prompt each time the computer
boots.
Selecting Disable only disables the prompt indicating when to press
<F2> to enter Setup. Setup can still be entered by pressing <F2>
before POST completes.
POST errors Enabled
Disabled
Enabling this option causes the computer to pause and display a setup
entry or resume the boot prompt if an error occurs at boot.
If this option is disabled, the computer will always attempt to boot
regardless of a setup entry or error.
Floppy check Enabled
Disabled
Enabling this option causes the computer to verify the diskette type
each time the computer boots.
Disabling this option speeds up the boot process.
Quiet boot Enabled
Disabled
Enabled inhibits the display of POST messages and instead displays
the Digital logo.
Disabled allows the display of POST messages when booting.
Summary
screen Enabled
Disabled Enabling this option causes the computer to display configuration
parameters (in the form of a summary screen) during boot.
Keyboard Features
Menu Fields Settings Comments
Numlock Auto
On
Off Turns
Numlock
on or off each time the computer boots.
Key click Disabled
Enabled Enables or disables the audible key click feature.
Keyboard
auto-repeat
rate
2/sec
6/sec
10/sec
13.3/sec
18.5/sec
21.8/sec
26.7/sec
30/sec Sets the number of times a second to repeat a keystroke while the key
is held down.
Keyboard
auto-repeat
delay 1/4 sec
1/2 sec
3/4 sec
1 sec Sets the delay time after a key is held down before it begins to repeat
a keystroke.