iv
FP-770T User's Manual
Do not press the screen's touch surface too strongly with either your finger or a hard
object, since the touch surface may be damaged.
Do not press on the touch panel's face with sharp objects, such as a mechanical
pencil or a screwdriver, since it can damage the panel surface.
When the surface of the display screen becomes dirty or smudged, clean the display with
a cloth soaked in a neutral detergent. Do not use paint thinner or organic solvent.
Avoid using or storing the FP in direct sunlight, excessively dusty or dirty environments, or
where chemicals or their vapors are present in the air.
Please avoid using the FP in areas where sudden, large changes in temperature may occur.
These changes can cause condensation to form inside the unit, possibly causing an accident.
Avoid restricting the FP's natural ventilation, or storing and using the FP in an environment
that will raise the FP's internal temperature above its designated limits.
Do not use or store the FP in areas where chemical vapors are present or where
chemicals may come into contact the unit.
There are minute grid-points on the LCD surface. These points are not defects.
The displayed color will look different when viewed from an angle outside the specified
view angle. This phenomenon is a common attribute of LCD's and is not a defect.
Displaying a single screen image for long periods of time can cause an afterimage to
remain on the screen. To correct this, turn the unit OFF for a short period (5 to 10
minutes), then ON again. This phenomenon is a common attribute of the LCDs, and
not a defect. To prevent the creation of an afterimage, you can change the screen display
periodically to prevent the displaying of a single image for a long period of time.
For the correct use of this unit, please follow these guidelines:
Notes on the FP's Liquid Crystal Display (LCD)
Safety Instructions
Caution
!!!!!
