FP-770T User's Manual
3-5
Installation and Wiring
1) Connect the FP's power cable to the main power supply.
2) Check to make sure the FP's power cord is disconnected from the main
power supply.
3) Remove the terminal block's transparent cover.
4) Remove the screws from the 3 middle terminals, align the ring terminals
and re-attach the screws. (Check that each wire is securely connected)
5) Replace the terminal block's transparent plastic cover.
Use no more than 0.5~0.6N•m of torque to tighten the screws.
Note:
3-2-2
FP Power Cable Connection Procedure
