FP-770T User's Manual
3-11
Installation and Wiring
SIZE
Used to select the display size. Either center display mode or full
screen display mode can be selected. (In the XGA display mode,
selecting “NORM” automatically selects the full screen display
mode.)
NORM
: Center display
EXP
: Full screen display
MODE
Always select “VESA”.
R-CONT
Used to adjust red.
G-CONT
Used to adjust green.
B-CONT
Used to adjust blue.
CONT
Used to adjust the contrast.
BRIGHT
Used to adjust the brightness.
SELECT
Used to select the adjustment items. Press this switch to select an
item.(Item changes to reverse video) Pressing again deselects the
item.
+
Used to increment the value of the selected item. When the value
reaches the upper limit of the setting range, any further switch
input is ignored. Pressing this switch in the SIZE (size switching)
mode sets the display size to “EXP” (Expanded display).
-
Used to decrement the value of the selected item. When the value
reaches the lower limit of the setting range, any further switch
input is ignored. Pressing this switch in the SIZE (size switching)
mode sets the display size to “NORM” (Normal display).
To perform display adjustments, follow the procedures given below:
1) Press the RESET switch located in the front maintenance panel while touching the
upper left corner of the FP display to start the display adjustment mode.
2) Normally, display adjustment mode is in standby. Press the [MENU] switch to
activate the setting switches. Adjustment Menu 1 is then displayed.
3) Use the [SELECT] switch to select a desired item.
4) Use the [UP] or [DOWN] switches to change the value of the selected item.
5) Press the upper left corner of the FP display again to exit the display adjustment
mode.
•
To adjust the FP's image quality, press the [PHASE] and [CLOCK]
switches alternately until the optimal image appears.
Note:
