Management
Remote Console Port
The remote console port is a logical port used by the communications server
software when communicating using the MOP or Telnet protocol. The remote
console port has fixed port characteristics values that you cannot change. You can
enter most of the communications server commands at the remote console port.
DSVCONFIG Configuration Procedure
DSVCONFIG is the configuration procedure used on a load host to configure
the load host node database. This database includes the DECnet databases and
the communications server configuration database. It contains an entry for your
communications server. The entry provides the necessary information to downline
load software to your communications server and up-line dump memory from the
communications server.
Terminal Server Manager Software
Terminal Server Manager (TSM) is a software utility that runs on a VMS host. It
is not included with the communications server software and must be purchased
separately. TSM is a management tool that enables you to configure and manage
all communications servers on the same extended LAN.
SNMP Access
You can configure the communications server to respond to SNMP GET and
GET NEXT messages from an internet host. You can also configure the
communications server to send TRAP messages.
To configure the communications server for SNMP access, you must configure the
communications server and at least one internet host. The internet host must
be able to generate SNMP GET and GETNEXT messages, and optionally receive
TRAP messages.
Management 3–23