Management
The following example shows how to change the STOP BITS to DYNAMIC on
port 5:
Local> CHANGE PORT 5 STOP BITS DYNAMIC
•
TYPE
Determine the device type: HARDCOPY (for hardcopy devices), ANSI
(for ANSI standard video terminals), or SOFTCOPY (for non-ANSI video
terminals). The TYPE characteristic is not used when the port has the
ACCESS characteristic set to REMOTE. ANSI is the default and is necessary
for command line recall and edit.
The following example shows how to change the TYPE to HARDCOPY on
port 5:
Local> CHANGE PORT 5 TYPE HARDCOPY
Note
In order to make new port characteristics take effect, you must logout the
port after changing the characteristics. The Privileged mode allows you to
do this from another device port on the communications server.
Management 3–9