Operation
Managing Sessions
To interrupt a service session and return to the Local prompt, press the Break
key. Another session can be established with the same host or with a different
host. You can establish up to four sessions simultaneously.
Additional commands that can be issued at the Local prompt include:
•
SHOW SESS[IONS]—Lists all active sessions.
•
RES[UME] SESS[ION] n—Resumes a particular session.
•
DIS[CONNECT] SESS[ION] n—Ends a particular session.
Using TD/SMP Support
The communications server supports the TD/SMP protocol. Devices that use this
protocol can run several sessions concurrently on the same screen. To switch
sessions, move the cursor from one window session to another. To enable TD/SMP
protocol support for a port, use the following command:
Local> SET PORT MULTISESSIONS ENABLED
Asian Terminal Support
The communications server supports Asian terminals that use On-Demand
Loading of characters and fonts. To use this feature, issue the command:
Local>SET PORT ODL ENABLED.
This feature is available on a LAT network only.
Operation 4–5