Hub Manager Status Display
30
DECrepeater 900GM Installation and Configuration
Configuring the Module (Cont.)
[10] Downline Upgrade (Cont.)
After you initiate the DLU process, the screen displays the following message:
DLU process started!
NOTE:
Because of variances in network configurations (load
path and traffic levels), this initial stage of the DLU
process can take up to 10 minutes to complete.
CAUTION
!
If power is interrupted during Stage 3 of the DLU
process, the firmware image can become corrupted. Do
not turn off power to the unit or perform any action that
can cause the unit to lose power during Stage 3 of the
DLU process.
If your module is installed into a DEChub ONE, go to the section titled DLU Process
Completion.
If your module is installed into a DEChub 900, the screen displays the following
message:
Module not responding! Connection closed!
This is normal.
The Hub Manager status display indicates the following:
4:
DECrepeater 900GM
unknown
The Hub Manager status display continues to display this message until the DLU
process is complete. This is normal.
