8
DECrepeater 900GM Installation and Configuration
Removing the Module
1
Disconnect all the cables from
the module.
a. To remove the AUI cable, push
the connector slide latch to the
unlocked position, then discon-
nect the cable.
b. To remove the Telco cables,
use a flat-blade screwdriver to
loosen the two screws at the
ends of the plugs, then discon-
nect the cables.
2
Unseat the module from the
DEChub 900.
a. Lift the release lever located on
the top of the DEChub 900 slot.
b. Pivot the module back on its
bottom mounting tab, and dis-
engage the module from the
backplane.
LKG–8763-93I
Unlocked
Screws (2)
Mounting tab
LKG–8717-93I
Lift release lever
