15
DECrepeater 900GM Installation and Configuration
Configuring the Module (Cont.)
Description of Menu Options
This section describes the menu options that are available from the
DECrepeater
900GM INSTALLATION MENU
. Note that the out-of-band menu options apply to the
module only when it is in standalone mode (configured in a DEChub ONE docking
station).
[1] Reset with Factory Defaults
This option resets the module, causing most of the module’s configured NVRAM
parameters to be initialized to factory default values.
Following are some examples of the module’s configured NVRAM parameters that
are reset to factory defaults:
•
SNMP read/write community –– this name is reset to
PUBLIC.
•
SNMP trap addresses ––all SNMP trap addresses are deleted.
•
In-band interface IP address –– this address is deleted.
•
In-band interface default gateway address –– this address is deleted.
•
Out-of-band interface IP address –– this address is deleted.
•
Out-of-band interface port speed –– reset to 9600.
Following are the only parameters that are not reset:
•
Serial number
•
Reset count
•
Error log data
