Digital Equipment DECconcentrator 500, Installation Manual, Page: 41 / 98

DECconcentrator 500 Installation 3–7
3.2.3 Installing the Concentrator in a Rack
To install the concentrator in a rack, do the following:
1. With one person supporting the front of the unit, slide the unit into the rack
from the front of the cabinet (see Figure 3–4). Make sure that the I/O panel is
visible to monitor the LEDs.
2. Fasten the rackmount brackets to the U-nuts on the cabinet rails. Use the four
10–32 Phillips-head screws with lock washers provided in the rackmount kit.
3. Do not connect any cables until instructed to do so.
Figure 3–4: Installing the Unit in the Rack
Front of cabinet
LKG–3807–91l
(4) 10-32
Phillips-head screws
with (4) lock washers