Chapter 5 – Monitoring Features
PS-2000B Series User Manual
5–8
5.2.3 System Monitoring Operation (PSB_Smon.exe)
The System Monitor screen will not be displayed immediately after the System
Monitor is started, instead, the icon will be stored in the System Tray.
When and error is detected, the "Operations (buzzer, pop-up message output,
etc.)" set on the System Monitor Property are performed, and then an "X" mark
appears on the icon on the System Tray, which indicates an error status. When the
icon on the System Tray changes as illustrated below, double-click on the icon to
review the description of the error condition.
Icon display upon start-ups
System Monitor Screen
The following is the System Monitor screen.
The [Buzzer Off], [Reset], [Minimize], [Close] buttons are located at the bottom
of the System Monitor screen. The following table lists the features of the buttons.
Icon display when an error
is detected.
Button
Operation
Buzzer Off Stops the buzzer sounds at normal operations.
Reset
Clears the error condition held at normal operations and
inside the System Monitor.
Minimize
Minimize the System Monitor into the icon display.
Close
Closes the System Monitor.
As for Device No. of SMART, [0] means Master and [1] means
Slave.
