Chapter 2 – Hardware Installation
PS-2000B Series User Manual
2–2
Removing the PS-B Unit's Cover
Lay the PS-B unit on its side and remove the four (4) cover attachment screws.
Slide the cover in the direction shown and then up to remove it. (When reattaching
the screws, use a torque of 0.6 to 0.8N•m.)
Removing the rear face Maintenance Cover allows you to eas-
ily remove optional units and expansion boards. To remove
this cover, unscrew the attachment screws (2), and lift up the
cover. (See drawing below). (When reattaching the screws,
use a torque of 0.5 to 0.6N•m.)
Can be removed
by hand
1)
2)
