INSTALLING THE PRINT CARTRIDGE
Remove the protective film from the face of the print head and retain the film.
This protective film may be re-applied to store partially used cartridges. If it is
necessary to remove the print head and store for a long period of time, it is best
to re-apply the plastic film, and place the cartridge in a closeable plastic bag.
The print cartridge is installed into the print head by inserting at a slight angle and
depressing the rear of the cartridge until it snaps into place. To remove the
cartridge gently lift the rear tab on the
NOTE: EACH PRINT CARTRIDGE HAS BEEN TESTED
AT THE FACTORY AND CONTAINS SPECIALLY
FORMULATED INKS. USING ANY OTHER PRINT
CARTRIDGE WILL HAVE UNDESIRABLE RESULTS.
PRINTHEAD SEATED CORRECTLY
INSERT PRINTHEAD INTO
HOLDER FROM THIS ANGLE
AND PRESS DOWNWARD UNTIL
SEATED
3
EVOLUTION SC
SYSTEM MANUAL Issue 1.1 15 November 2006
