manualshive.com logo in svg

Digital Design EVOLUTION SC, Installation And Operation Manual

Share
Download
Digital Design EVOLUTION SC Installation And Operation Manual Download Page 47

 

PRINT CARTRIDGE MAINTENANCE 

 
It is necessary to maintain the 

EVOLUTION SC

 print cartridge free from 

accumulated dust and debris. Periodically the cartridge should be removed and 
cleaned. This is totally dependent on the operating environment and the average 
printable life of the ink cartridge. In extremely dusty environments, this 
maintenance procedure may be required regularly. 
 
To clean the cartridge, carefully clean the face of the cartridge with a soft, lint 
free wipe. Use caution in wiping the NOZZLE area so as not to scratch the face. 
Always wipe in the ARRAY PLATE vertically as indicated.  
Clean the CONTACT area in a similar fashion. 
 
 
 

NOZZLES 

DIRECTION OF WIPING 

CONTACT AREA 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

3 

EVOLUTION SC

 SYSTEM MANUAL Issue 1.1  15 November 2006

 

Summary of Contents for EVOLUTION SC
















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands