F4 MENU
Place the unit in the Command mode and press
.
The screen shown at left is produced.
Press the number that corresponds to the
parameter you wish to change.
1 - LANGUAGE:
Press
and the screen will change like the
one on the left. The default language is English;
the other choice is Spanish. Scroll through the
choices using either
or
. Once the
desired language is shown on the screen, press
. This will return the unit to the Command
mode. Whenever language is chosen, all prompts and commands shown on the
screen will be in that language.
2 - INK SUPPLY:
1 = LANGUAGE
2 = INK SUPPLY
3 = SET UNIT I.D.
4 = LOAD CARD
< - - SELECT - - >
ENGLISH
REMAINING INK
100
C NEW CARTRIDGE
OTHER KEY EXIT
The second line of the display shows the
percentage of ink remaining in the print
cartridge.
Each time a new cartridge is installed the user
must reset the system ink gauge by pressing the
C
key.
When a C is entered the system automatically profiles the operating conditions
for the new cartridge.
Each cartridge is tested at the factory and uses specially formulated and
proprietary inks. The correct drive voltage, pulse width timing and pre-fire pulse
warming may be adjusted for optimum operation.
NOTE: USING NON-AUTHORIZED CARTRIDGES WILL
PRODUCE UNDESIRABLE RESULTS
17
EVOLUTION SC
SYSTEM MANUAL Issue 1.1 15 November 2006
