Vodafone Business Surveillance – IP200 Installation User Guide
C1 – Public
Page 11
5.
Overview of the key setup steps
Encoder is pre-configured to assistance with installation. There are four key steps in encoder configuration.
1.
Configure the communications settings for LAN ports, cellular modem
2.
Provide the details of Vodafone Business Surveillance server and encoder account
3.
Add each desired video feed to the encoder
4.
Select the desired recording location and encryption settings
This section describes each of these four key steps.
Step 1 – Configure the
communications settings
The encoder can utilise both internal and external communications
devices. However we
There are four main tasks to perform in this section:
1.
Enable and disable communications methods
2.
Configure the settings for each communications bearer
3.
Select the communications bearers to use to connect to
Vodafone Business Surveillance Server (both a primary and
secondary)
4.
Enable a firewall on the primary/secondary communications bearers
5.1.1
Enable and disable comms methods
For security reasons, it is recommended to disable any comms method that are not required. Click the
desired communications method and use the Enable/Disable this device menu item.
