DG-SC8860VI User Manual
82
SMTP Server: Input the IP address or host name of SMTP server
(mail server) you wish to use.
Sender: Input the sender’s email address in sent email. This will
help you to identify the email sent by SKYROS iView. For some
SMTP servers, you must set a sender email address of the same
domain name.
Receiver: Input the email receiver’s address here.
CC: input additional email receiver’s address here.
Subject: Input the subject of sent email. This will also help you
to identify the email sent by SKYROS iView .
Number of attachments: Input the number of snapshot
attachments that will sent with email, so you can see the image
of camera by email (1 to 10 attachments only).Email alerts
Interval: Input the time interval between two emails. A new
email will not be sent within the interval you specified here even
a new event is detected.
User: Input the user name for SMTP authentication. Input only
when it’s required by your SMTP server, you can leave it blank
if it’s not required.
Password: Input the password used by SMTP authentication.
Camera Scan Interval
Input the time interval to wait between camera scan.
Connection Retry
Decides the behavior when SKYROS iView lost communication with IP
camera:
Retry: Retry for the time you specified here.
Always retry: Retry to connect to IP camera until successfully
connected.
When you finish with the settings, click ‘OK’ button to save changes you made, or click ‘Cancel’
button to discard all settings you made.
