DigiSender DGHDP1 Instruction Manual Download Page 28

Page 28

Please read the instructions carefully prior to installation

DGHDP1 - 

DigiSender® HD Pro - 1080p Powerline AV Sender System

Information & Safety

Safety Precautions

Safety Precautions

These safety precautions are provided to ensure the best and safest user experience with the least amount of 

inconvenience. Please read this Instruction Manual thoroughly before installation and operation. It is advised that 

you keep the original packaging, protective materials and any documentation included with this product, as well 

as your invoice or receipt of purchase.

•  Do not use this product outside or in any environments where the units can be exposed to water or 

moisture (bathrooms, water tanks, damp basements, swimming pools, etc.). 

 

•  Do not, in any circumstance, open the case of either of these units. 

•  Do not place containers holding liquid (vases, drinks, etc.) or wet materials on top of or in the 

vicinity of these units. 

•  Only use a dry cloth to wipe down or clean the case. Do not use liquid cleaners or spray cleaners. 

•  Only operate this product in well ventilated areas. Do not place in closets, cupboards, covered 

boxes, etc. 

•  Do not block the air vents on the units. Always leave at least 2cm of clear space around the units 

during operation to ensure heat is properly dissipated; this will maintain and prolong the life of the 

product. 

•   Do not place the units on soft surfaces (sofas, carpets, rugs, etc.) where the units might sink into 

the surface or where the surrounding material can affect ventilation and heat dissipation. 

•   Do not place the units on any surface that generates heat (radiators, electric heaters, fire places, 

etc.).

Summary of Contents for DGHDP1

































Reviews: