Page 15
Please read the instructions carefully prior to installation
DGHDP1 -
DigiSender® HD Pro - 1080p Powerline AV Sender System
Each Transmitter can be connected to a maximum of four Receivers. When installing an additional receiver, please
perform the below procedures in order:
• Connect and
Install the Receiver
as on pages 08 and 09.
• Reset the Receiver PLC Settings to Factory Defaults
as on page 20.
• Perform the
PLC Grouping
procedure on page 18.
• Perform the
Transmitter & Receiver Syncing
procedure on page 17.
Advanced Procedures
Installing Additional Receivers
Each Receiver can be connected to a maximum of four Transmitters. This would allow you to choose from multiple
source devices such as your HD Satellite receiver, Blu-Ray™ player, DVD recorder or even CCTV.
Advanced Procedures
Running Multiple Transmitters with Multiple Receivers
Selecting a Transmitter
• At the Receiver, press the
Menu
button on the DigiSender® Re-
mote Control to bring up the On-screen Menu. Use the
Scroll Up
and
Scroll Down
buttons to go to the
Select TX Station
option.
• Press the
OK
button to enter the
Select TX Station
option.
• On the
Select TX Station
page, a list of all Transmitters that
are currently synced with the Receiver will be displayed. Use
the
Scroll Up
and
Scroll Down
buttons to select the desired
Transmitter.
• Press the
OK
button to confirm your selection.
• If the selected Transmitter is currently transmitting video, this
will be displayed. The Remote Relay will automatically be
transferred to the selected Transmitter so that you can control
the source device it is connected to.
SETUP
Language
Network Bandwidth
Resolution Control
Sleep
LIP SYNC
Select TX Station
Information
SETUP
Select TX Station
TX Station 1
TX Station 2