Front panel
1.:
switch on / off in stand-byswitching
NOTE:
whenon from stand-by, the receiver can
have different reaction times, refer to theparagraph
Energy saving.
2. CHANNEL
▲
:
to go to the next channel or
move the cursor in the menus.
3. CHANNEL
▼
:
to go to the previous channel or move the cursor in the
menus.
4. IR: infrared
sensor for remote control
5. Green LED:
remote control action LED indicator (flashing)
6.
Red LED:
stand-by status LED indicator
7. Display:
LED, 7 segments, 4 digits.
8. Door / 2 Smart-Card Readers:
front slot for smart-card insertion of two
different operators.
ATTENTION:
the card must be inserted with the gold chip
facing up.
For the use of the tivùsat or Nagravision and Conax paid services and the
management of the related smart-cards, refer to the user manual supplied with
them.
[English]
Rear panel
1. LNB IN:
for connection to the dish.
NOTE:
To view the tivùsat service, the dish
must be pointed at the HotBird 13 ° East satellite.
2. LNB OUT:
satellite signal
loop output, for connecting an additional satellite receiver. To be able to use it, you
Summary of Contents for Conax
Page 20: ...Italiano...
