converter associated with the selected satellite. Generally it must be kept active.
Its deactivation is instead useful when building IF-IF distribution systems (for
expert users).
7. Loopthrough:
activation of the pass-through output of the TV antenna signal
(LNB OUT connector, see par. 2.2), for the connection of an additional satellite
receiver.
WARNING
- If two receivers are connected to the looped antenna signal via the LNB OUT
feedthrough connector, they cannot operate simultaneously. When one receiver is
switched on, the other must be placed in stand-by (with the tuner not powered)
and vice versa.
- To connect several receivers to an SCR system, do not use the through antenna
connection of the receiver, but use a suitable external signal divider.
Motorized antenna system
To configure a system with a motorized antenna, press thebutton
YELLOW
Antenna Motor Setting
and select the desired Motor Type:
[English]
1. DiSEqC 1.2
(semi-automatic): from the Motor Setting menu you will have to
move manually the antenna and memorize the position of each single satellite
concerned, so that the receiver recalls the correct position when tuning channels.
2. USALS
(automatic), the local LONGITUDE and LATITUDE values must be
defined in the Motor Type menu. From this data and the satellite longitude
(defined in the Edit Satellite Data menu), the receiver will automatically direct the
motor to the exact position when tuning channels.
channels
LCN:
set theoption
LCN
(sorting function
automatic channel)
-
Yes (Active)
-No (Off)
If it is active, after
scanning the channels, thelist
channelof the receiver will
first contain thechannels of
sortedthe tivùsat platform according to the numbering predefined by tivùsat itself;
all the other channels will occupy the list starting from position 1000 in sequential
storage order. It is recommended to keep this function active.
NOTE
When the LCN function is active, you will not be able to manually change the
channel position number from the menu Channels> Change Channel No., which
Summary of Contents for Conax
Page 20: ...Italiano...
