DiGiQuest Conax, Owner'S Manual

Page: 9 / 21

automatic(Auto option).
AV (Audio / Video) Settings
Set theoptions
Audio / Videoaccording to the
characteristics of the screen
(TV / monitor) connected to the
receiver:
- Resolution : resolution
videoof thedigital
HDMIoutput.
- Screen: formatformat
of the TV / monitor screen connected to the receiver, 16: 9 or 4: 3, and how the
images are presented on the screen:
a. 16: 9/4: 3 Full Screen: the image will always be adapted to the entire screen
size, even distorting it in width or height if the source is not the same size as the
screen.
[Italian]
b. 16: 9 Pillar Box: When the video source is broadcast in 4: 3, the receiver will
apply two black bars to the left and right sides of the image to fill the screen
without distorting the original image.
c. 16: 9 Zoom: 4: 3 images are proportionally adapted to the width of the screen,
cutting the upper and lower portions d. 4: 3 Letter Box: When the video source is
broadcast in 16: 9, the receiver will apply two black bars above and below the
image to fill the screen without distorting the original image.
is. 4: 3 Centered: 16: 9 pictures are proportionally adjusted to the height of the
screen by cutting off the side portions.
- TV Scart output: color system of analog SCART, RGB or CVBS video output.
- Digital output: encoding the digital, digital stereo (PCM) or original audio output
as source (Bitstream).
- Audio Synchronization: audio-video synchronization function, recommended for
expert users, to be activated only in case of need.
Antenna setting
Set the following options
according to yoursystem
antenna, fixed or motorized