Appendix
65
Appendix
Set back to factory default values
Users who forget the network account and password of the product can
press "Reset" to recover to the factory default values, and the device will be
rebooted at the same time.
1. In Network info press five side button for 10 seconds with two beeps to
enter
“Set back to factory default values”.
2. Select Reset Account & IP, admin account and password will be set as
admin (add a new account if no admin account), while the function of
IDCView only is cancel. Device IP will be automatically acquired through
DHCP (if no DHCP server, then the device IP should be preset as
192.168.1.10
), the acquired IP can be displayed by LCD panel. (for the
relevant operation, see
3-2 Total current and IP operation)
3. Select RESET ALL to clear all the data of the device. (Kilo Watt per Hour
module will also be zeroed if any).
Summary of Contents for SMLW 12 Series
Page 1: ...1...
