Chapter 3 Panel operation
19
When LCD shows the maximum total current record hold the five side
button in the middle for 3 seconds with a long beep to zero the maximal
When LCD menu shows current info hold five side button in the middle
for 3 seconds with a long beep to enter alarm current setting. For
modification of alarm current, press to increase the alarm current by 0.5A
in each press. After increasing to the maximal alarm current, the value
will return back to 0.5A again, and this will cycle. Once the alarm current
reaches the wanted value, hold Function for 3 seconds with a "beep" to
end the setting.
When LCD menu shows network info, hold five side button for 10
seconds with two beeps to enter reset mod. See
Summary of Contents for SMLW 12 Series
Page 1: ...1...
