DIGIPDU SMLW 12 Series Operation Manual Download Page 2

Page: 2 / 74

RoHS information | BellWin Information

RoHS information

This product complies with RoHS specification.

Safety information

Caution Sign Please read carefully the notes and

instructions in the manual to avoid any personnel injuries or

device damages.

Dangerous Voltage High voltage may exists in this product,

so avoid touching.

A triangle with flash sign and an arrow inside is to alert users

the presence of uninsulated dangerous voltage within the

product’s enclosure that may be of sufficient magnitude to

constitute a risk of electric shock to persons.

Mechanical Grounding

Warning: In order to avoid a fire hazard or risk of electrical shock, do not

expose the product to rain or moisture. Dangerous high voltage exists inside

the device enclosure. Please do not open the enclosure. Only qualified

personnel can perform maintenance of this product.

Summary of Contents for SMLW 12 Series











































































Search results

Summary of Contents for SMLW 12 Series

Reviews:

Related manuals for SMLW 12 Series

Brands by name

Popular brands

DIGIPDU SMLW 12 Series, Operation Manual

Search results

Summary of Contents for SMLW 12 Series

Reviews:

Related manuals for SMLW 12 Series

Brands by name

Popular brands