background image

22

Federal Communications Commission (FCC) Statement

15.21

You are cautioned that changes or modifications not expressly approved by the part 

responsible for compliance could void the user’s authority to operate the equipment.

15.105(b)

This equipment has been tested and found to comply with the limits for a Class B 

digital device, pursuant to part 15 of the FCC rules. 

These limits are designed to provide reasonable protection against harmful 

interference in a residential installation.

This equipment generates uses and can radiate radio frequency energy and, if not 

installed and used in accordance with the instructions, may cause harmful 

interference to radio communications. 

However, there is no guarantee that interference will not occur in a particular 

installation. 

If this equipment does cause harmful interference to radio or television reception, 

which can be determined by turning the equipment off and on, 

the user is encouraged to try to correct the interference by one or more of the 

following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the 

receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the 

following two conditions: 

1) this device may not cause interference and

2) this device must accept any interference, including interference that may cause 

undesired operation of the device.

FCC RF Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an 

uncontrolled environment. 

End users must follow the specific operating instructions for satisfying RF exposure 

compliance. 

This transmitter must not be co-located or operating in conjunction with any other 

antenna or transmitter.

ECG-10X wireless system configuration and operation:

1. Quality of service: BQB test

2. Security requirements: Key in Pin code "0000".

3. If users paired with PC was unsuccessful, the data was not shown it on the LCM. 

Users can repairing and upload the it again.

Summary of Contents for ECG-10X














Reviews: