background image

Your Cardio Care unit is warranted to be free from defects in materials 
and workmanship appearing within 1 year from the date of purchase, 
when used in accordance with the instructions provided. The above 
warranties extend only to the original retails purchaser.

According manufacture date, please see product’s CE label SN number,
the SN coding principles are as below.

SN Coding principles

The first to fourth codes 0009 are the product part number, A9800009, 
last four codes.
The fifth to sixth codes “YY” are the last 2 codes of A.D.
The seventh code “M” is month (1~9, Oct=A, Nov=B, Dec=C) 
The eighth to ninth code “DD” are manufacture date 
The tenth to fourteenth code “XXXXX” are serial number 
The fifteenth code “R” is the version of the product (A9800009)

Sings and Symbols

Problem

Cause

Solution

Nothing happens when 
you press the power 
button

Measurement finishes 
but result is abnormal.

The batteries are worn 
out.  The batteries are 
inserted incorrectly. 

The electrodes are not 
making good contact 
with your finger or 
chest. 

Your body is too tense. 

Electrode contact was 
broken before 30 
seconds of data has 
been recorded. 

The chest electrode has 
been applied over 
clothing. 

Your skin is dry. 

The ECG signal is too 
weak. 

Replace both batteries 
with new ones. Insert the 
batteries with their 
polarities correctly 
aligned.

Check the instructions 
and repeat the 
measurement.

Relax and repeat the 
measurement.

Make sure that your 
finger and chest maintain 
contact with the 
electrodes for the full 30 
seconds of the 
measurement.

Apply the chest electrode 
to bare skin.

Moisten your skin with a 
damp towel or wash your 
hands in advance, but 
don’t use the unit in wet 
hands.

Make sure that the 
electrodes are applied 
correctly. However, for 
some individuals 
measurement may not be 
possible.

18

19

Warranty Information

Manufacture Date

Troubleshooting

Type B Equipment

Caution/Warning, Consult accompanying 
documents

CE-European Conformity. This device 
conforms to the standards for products 
sold in the European Economic Area.

Interference may occur in the vicinity of 
equipment marked.

An item that poses no known hazards in 
all MR environments.

Consult instruction for use

Product Name: Cardio Care

Model No: ECG-10X

Power: Battery AAAx2  3Vdc

Manufacturer: digiO2 International Co., Ltd.

4F-13, No. 79, Sec. 1, Hsin Tai Wu Rd., Hsi-Chih, Taipei Hsien 221, Taiwan

S/N:

0009YYMDDXXXXXR

0120

FCC ID : X58-ECG10X

Summary of Contents for ECG-10X














Reviews: