5
Connection
2. CONNECTION
The camera has the following termination cables:
1. RJ45 Network Interface:
Connect to a router or switch on your network
using RJ45 Ethernet cable (Cat5e or better). 100Mhz connection. PoE
supported (class 3 PoE switch required).
NOTE:
Use the included RJ45 coupler to connect to male end of RJ45
Ethernet cable.
RJ45 Coupler
2. Audio Input (RCA):
Connect to a self-powered microphone for listen-in
audio.
3. Audio Output (RCA):
Connect to an amplifier or self-powered speaker for
intercom/2-way audio.
4. DC12V (1A):
12V DC power input terminal. Make sure to follow correct
polarity (+/-) marked on the power connector when connecting to power.
•
Minimum Power Requirement:
450mA / 5.4W.
