Installation Overview
SECTION 3
18
HARDWARE MANUAL |
Copyright
©
2007 Digimerge Technologies Inc.
B. Hardware Installation - Optional GPIO
Connections
The Optional Connection includes the use of the
GPIO Cable for Alarm and/or PTZ Control.
• Feed the wires for the desired control into the
Camera through the stand.
• Connect the GPIO Cable to the GPIO Port
located to the right of the Ethernet Cable
Connection.
• Connect the wires to the GPIO block inside the
camera housing. Tuck the GPIO block below
the bracket once complete.
NOTE:
The GPIO Block is color coded and labelled.
Please see Appendix #2 for Alarm Block
connections.
C. Adjusting the Included Lens
• Use the ZOOM and FOCUS controls on the front
of the attached lens to adjust:
z
FOCUS - Adjust the lens to make
the image appear sharp and well
defined once the varifocal distance
has been set.
z
ZOOM - Increase or Decrease the
viewing distance for the camera
image (adjust the varifocal distance
between 7.5~50mm)
NOTE:
Once all internal connections have been
made, set the desired angle for the camera and
secure the tightening screw on the camera base.
Replace the cover and tighten the screws with the
HEX tool.
Focus
Zoom
Summary of Contents for DNB6300V
Page 9: ...GETTING STARTED SECTION 1 Package Contents 10...
Page 20: ......
Page 30: ......
Page 42: ......
