Digilog Electronics MYOB User Manual Download Page 7 | Manualshive

Page: 7 / 11

Digilog Electronics MYOB User Manual Download Page 7

7

Menu Items

1. On Time

Factory Default: 20 seconds

This parameter sets the time of which the unit is ON when in the battery mode and is
also the time the scanner is enabled when powered by the AC plug pack.
This time is adjustable from 10 seconds to 60 seconds by using the Scroll UP or

Scroll Down buttons.

Once the desired value has been set press the P button to save the new value or
press both Scroll UP and Scroll Down buttons together to abort.

2. Clock Adj

This option allows the real time clock to be adjusted manually. When selected

the time, date and day of week can be adjusted by using the Scroll UP or Scroll Down
buttons.
On first time entry to this option the time will be displayed on the bottom line of the
display with the hours flashing. Adjust the desired hour (24 hour mode) and select the
new value by pressing the   P   button.
Once  the    P      button  has  been  pushed  the  minutes  will  flash.  Adjust  to    the  desired
value and push the  P   button again which will then move on to the seconds.
Repeat this until the time, date and day of week have been  adjusted. Termination of
this function will occur automatically once the end of the cycle has been reached.
At any stage of the cycle  pressing both  Scroll UP and  Scroll Down buttons together
will abort back to the main menu.

3. Station

Factory Default : 01

This parameter is used to set the Portable Timeclock address for communications.
The address can range from 01 to 30 by using the Scroll UP or Scroll Down buttons.
Once the desired value has been set press the P button to save the new value or
press both Scroll UP and Scroll Down buttons together to abort.

4. Job Cost

Factory Default; OFF.

This option enables or disables the Job Costing function. When enabled the Portable
Timeclock will prompt for the entry of a Job number.
Use the Scroll UP or Scroll Down buttons to select the required option and press the

P button to save the new value or press both Scroll UP and Scroll Down buttons

together to abort.

«
...
5
6
7
8
9
...
»

Summary of Contents for MYOB












Reviews:

No comments