VXpocket 440
User’s Manual
17
Installation under Windows NT 4
Windows NT 4 is not a Plug and Play operating system. Therefore
the VXpocket 440 is not automatically detected.
The card must be inserted before system start-up.
•
Insert the VX kit CD-ROM. The welcome page should
automatically open in your usual web browser. Go to your
soundcard’s driver page and click on the link of the Windows
NT version.
•
Or, if the driver has been downloaded from our web site, it has
to be expanded prior to the driver’s installation as follows.
Double-click on the downloaded file; it expands itself. You can
use the default destination location (Windows temporary folder)
or select another directory. The setup program will be
automatically launched after the extraction.
•
Click on the Next
Next
Next
Next button.
•
Click on Yes
Yes
Yes
Yes to confirm the License agreement.
•
Check the ‘VXpocket supported
VXpocket supported
VXpocket supported
VXpocket supported’ box and select a free interrupt
and I/O address.
Free interrupt and I/O address may be found in the Windows
NT 4 diagnostic tools.
•
Click on the OK
OK
OK
OK button.
•
The Wave driver will be automatically installed.
•
Click on OK
OK
OK
OK and exit the installer (finish
finish
finish
finish and close
close
close
close).
The wave driver is now installed. No reboot is necessary.
Note: The card MUST NOT be removed while running Windows NT
Note: The card MUST NOT be removed while running Windows NT
Note: The card MUST NOT be removed while running Windows NT
Note: The card MUST NOT be removed while running Windows NT
4.
4.
4.
4.
Removing the VX driver for Windows NT 4
•
Go to Add/Remove Programs in the Windows Control Panel,
•
Select the ‘Digigram VX Kit …
Digigram VX Kit …
Digigram VX Kit …
Digigram VX Kit …’ and remove it.
•
Follow the instructions of the InstallShield wizard.
Updating the VX driver for Windows NT 4
•
From the Start menu, click on the Settings
Settings
Settings
Settings: Control Panel
Control Panel
Control Panel
Control Panel
command.
•
Remove the driver as described above.
•
Run the installation program of the new driver (Installation
under Windows NT).