D i g i g r a m
22
General configuration
The mixer configuration options allow selection of: input and output
nominal level, input and output headroom, input type.
The input and output nominal level and input and output headroom
define the maximum value of the acceptable input signal. Set the nominal
level to the currently used nominal level. The headroom should be set to
avoid any risk of overload. If set beyond the installed card's capabilities,
the driver automatically sets the correct values. In this case, the displayed
values are wrong.
The Input Type selection allows selecting Digital Input, Analogue Input or
Automatic Selection. In this last case, Digital Input is selected whenever a
signal is present.
Always on top of the display
Right click on the Mixer icon in the taskbar, or go to the Mixer <
Options>
Options>
Options>
Options>
menu.
Select Always on top
Always on top
Always on top
Always on top.
Resetting the faders to their default values
Click on the <
Options
Options
Options
Options>
menu.
Select Reset levels
Reset levels
Reset levels
Reset levels
.
Selecting the input/output mixer channel
Click on the Mixer menu.
Select the required board and channel Mixer.
Setting the default values for each mixer line selected
Right click on the Mixer icon in the taskbar, or go to the Mixer <
Options>
Options>
Options>
Options>
menu.
Select Save current configuration as default
Save current configuration as default
Save current configuration as default
Save current configuration as default.
Getting the default configuration values for the mixer line
selected
Right click on the Mixer icon in the taskbar, or go to the Mixer <
Options>
Options>
Options>
Options>
menu.
Select Load default configuration
Load default configuration
Load default configuration
Load default configuration.
Leaving the mixer program
Click on the right button over the Mixer icon in the taskbar.
Select Exit
Exit
Exit
Exit.
General settings
Record source
Buttons allow selecting the input type.
Digital input:
Digital input:
Digital input:
Digital input: selects the digital input, only digital gain can be applied.