Now press
or
to choose if the speed has to be expressed in
Km/h or Mph. Press
to confirm. Escape
.
Setting up of parameters for the Speed-to-fly function
Press
, 3 times
(you will see the words “SET 2” flashing). By
pressing
you cycle through the setting up of:
AUTO STF
: by means of
or
you set it to the values 0=STF
manual, 1=STF automatic. If it is set to 0 you can switch to the STF
mode only by pressing
. If it is set to 1 you switch to STF mode
automatically (in variometer mode after 7 sec. of ascent, in STF
mode after 7 sec. of descent) or manually, that is pressing
. All
this goes on until you set back to 0, that is manual STF.
POL
: by pressing
or
you access polar 1 or 2. Of the selected
polar, by pressing
you can cycle the Pol A, Pol B, Pol C coefficients,
which can be set with
or
(therefore you can memorize 2
different polars). The polar coefficients can be calculated with the
specific Digifly software you will find in the included floppy disk.
There is another parameter that can be set without accessing the
menu:
WIND
: the horizontal speed of the air mass you are flying in (with
negative value if against, with positive value if in favor). By pressing
you toggle between variometer and STF modes, by pressing
again you can access the Wind set-up function: display 3 will start
flashing; by pressing
or
you can set the desired value
(-50Km/h to +50Km\h); once you have set it, press
to quit.
N.B. In order for the STF function to work, the air-speed probe must
necessarily be installed.
Setting up clock and Sampling rate
Press
, press
three times ("SET 2" will start flashing), press
six times. Now by pressing
or
to adjust and
to confirm,
you can set respectevly:
- HOUR: the current hour.
- MIN: the current minutes.
- DAY: the current day.
- MONTH: the current month.
- YEAR: the current year
- REC SEC: the Sampling rate of the altitude recorder, which can
be set to 1 to 30 sec.
Caractéristiques techniques
3 altimètres avec lecture jusqu’à 10.000 m.
Variomètre analogique avec échelle jusqu’à +/- 10 mt/sec.
Variomètre digital avec échelle jusqu’à +/- 25 mt/sec.
Variomètre sonore avec differents tons en montée et en descente.
Variomètre de moyenne avec retard qu’on peut régler de 1 a 30
secondes.
Système de mesure métrique décimal ou anglo-saxon.
Indicateur de finesse digital
Indicateur STF analogique
Barographe
Anémomètre
Chronomètre, horloge, date
Mémoire des données
des derniers 10 vols.
Autonomie d’environ 200 h.
Poid: 200 gr. environ avec batteries.
Dimension 135x72x37 mm.
