Digifly Cartesio plus User Manual Download Page 58

Page: 58 / 72

Page 58

At the end of the download *.XLS and *.IGC files will be created in the VLTOOLS

directory.

The “Download Last Flight” button will save last flight in two different file format

flight.igc and flight.xls .

The “Download All Flights” button will save each flight in two different formats (*.igc

and *.xls) with file name 01, 02, 03 etc

The “Download All Flights” button will save each flight in two different formats (*.igc

and *.xls) with file name 01, 02, 03 etc.

Note: these files will be always overwritten so it's very important that you rename them

after the download.

Files *.igc can be viewed on your PC with most IGC compatible software packages e.g.

CompeGPS, MaxPunkte, GpsDump, Seeyou, Oziexplorer, etc.

Files *.xls can be read & edited using Mircosoft Excel.

For more info on all other functions read the Digifly VLTools user manual.

9.4

FIRMWARE UPGRADE

The software (firmware) on your Digifly instrument can be

updated as new releases are made available from Digifly.

This will allow your instrument to be kept up to date with new

functions and improvements.

The latest Digifly software may be downloaded from the Digifly web site

(www.digifly.com) & installed using the optional PC serial or USB cable.

The optional PC serial or Digifly USB cable is connected to the middle socket on the

base of the Digifly instrument.

When upgrading from Digifly instrument firmware version 44.0 (or older) to a new

version all previously recorded flights will be erased and all settings will be restored to

the factory default.

Summary of Contents for Cartesio plus









































































Search results

Summary of Contents for Cartesio plus

Reviews:

Related manuals for Cartesio plus

Brands by name

Popular brands

Digifly Cartesio plus, User Manual

Search results

Summary of Contents for Cartesio plus

Reviews:

Related manuals for Cartesio plus

Brands by name

Popular brands