Digifly Cartesio plus User Manual Download Page 12

Page: 12 / 72

Page 12

To change the selected parameter’s values, use the arrow keys

and confirm

with the

key (function “SAV”) or you can also leave without saving your edit with

the

key (function “ESC”).

To return to the instrument’s main display, press the

key (function “ESC”).

2.8

MULTI LANGUAGE HELP

To help you setup your Digifly instrument, the instrument supports several help

languages. To change the help language go to (MAIN SETUP \ n. 32 LANG) & select the

language of choice

When updating the software on the Digifly instrument, make sure you upload the latest

help file for the language you have selected, using the “upload HELP” function of the

Digifly Vltools software on your PC.

2.9

RESTORE FACTORY SETTINGS

To restore the factory settings (default values for all parameters), press and hold down

the

key as you turn vario on. Keep the

key pressed until a message “FACTORY

SET?” appears, then confirm with “YES” or “NO”. If you select “YES”, a confirming

message “SETUP RESET” is shown.

Summary of Contents for Cartesio plus









































































Search results

Summary of Contents for Cartesio plus

Reviews:

Related manuals for Cartesio plus

Brands by name

Popular brands

Digifly Cartesio plus, User Manual

Search results

Summary of Contents for Cartesio plus

Reviews:

Related manuals for Cartesio plus

Brands by name

Popular brands